
·
Program the enable/disable buttons (at any blank
programmable button location) as follows:
1. PRESS INTERCOM.
2. DIAL
**1.
3. PRESS programmable button.
4. DIAL a feature code
•
94 = Headset Button,
•
95 = External Ringer Button,
•
96 = Tape Recorder Button,
•
97 = External Pager Button.
5. PRESS TRNS/CONF.
6. REPEATEDLY PRESS programmable button AND DIAL sepa-
rate codes until all four buttons are programmed, OR PRESS
SPEAKER to end.
·
To use a feature button,
1. PRESS desired button to enable mode. The display denotes the
feature and shows it to be enabled.
2. To disable any active mode, press the corresponding feature
button to alternate off.
CAUTION
With the exception of a headset microphone, do not connect the audio output
of any external device to the auxiliary jack. Also, do not connect the tip and
ring leads of a telephone line to the auxiliary jack. Do not connect any de
-
vices to the auxiliary jack other than those mentioned above.
Attendant Manual - DSU II Digital Expandable System 75
GCA70-245 Other Features
Kommentare zu diesen Handbüchern